Enables One Touch Remote Call Answer/End with Plantronics CS Series Wireless Headset Systems
Compatible with Plantronics CS series wireless headset sytems including CS50, CS55, CS351N, and CS361N (not compatible with CS500 series)
Compatible with Nortel 1100 series and Cisco 9951, 9971, & 8961 phones
The EHS cable sends a ringer alert signal to the headset anytime the phone rings, anywhere within a headset's wireless range, allowing you to move freely throughout the office without missing a call
Upon hearing the signal, the headset wearer user presses the call control talk button on the headset to answer the call remotely
To end a call, press the call control button on the headset - the phone will go off and on-hook electronically
Eliminates the need for Plantronics HL10 handset lifter on your desk phone
No desktop footprint
Not interchangeable with other cords
Approximately 3 1/2 feet long
As of 9-10: the latest Nortel firmware 3.1 has enabled USB support on Nortel 1120E and USB and Bluetooth support for 1140E and 1150E. The firmware revision needs to be at least rev 0624C6J (1120E), 0625C6J (1140E), 0627C6J (1150E) and up.
Software rev 9: the USB port has to be enabled on the phone by pressing the services button on the phone twice -> select preferences -> Select headsets -> change headset type to USB
-> press Apply softkey
HOW TO CHECK THE FIRMWARE VERSION
1) Press the Services button once
2) Choose ‘Telephone Options’
3) Choose ‘Set Info’
4) Choose ‘General Info’
5) Scroll down and note FW Version
Blackwire 2xx will make the Nortel phone reset, need to use 6xx
Cart
;if (window.focus) {newwindow.focus()}; "USB EHS Cable for CS Series Wireless Headsets 83017-01")
