Allows Ring Tone to be Heard in Plantronics CS and Savi Series Wireless Headsets
Use the RD-1-POD with ShoreTel phones that support native "lead detect" (LD) headset hookswitch control - software must be ShoreWare version 7.0 or higher
If using software version 7.0 or higher, the RD-1-POD is compatible with the following ShoreTel IP phones and will not need an HL10 handset lifter for remote call answer/end: IP 212K, IP 230 (newer models only, date code must end in "GE" or "-03" or higher), IP 230g, IP 265, IP 560 (newer models only, date code must end in "GE" or "-03" or higher), IP 560g, and IP 565g
ShoreTel 110, 115 older 230 and older 560 and all IP 530 phones require the HL10 handset lifter instead of the ring sensor
Compatible Toshiba phones are those with an HHEU headset adapter installed
Compatible with Plantronics CS series and Savi Series wireless headset systems, and Voyager 510S wireless headset families
3.5mm plug (8" hardwired cord) inserts into Plantronics wireless headset charging base
Ring sensor (8" hardwired cord) has peel stick adhesive which sticks to the speaker well of phone to sense the ring tone when someone is calling
Once connected, the RD-1-POD will send a ringer alert signal to the headset any time the phone rings, anywhere within a headset's wireless range
Upon hearing the signal, the headset wearer presses the call control talk button on the headset to answer the call remotely
Approximately 19" long
3.5mm port located on the inline box allows you to plug in an optional Plantronics Online Indicator Light (OLI) to signal to others you are busy on a call; OLI part number PL-65116-01
Note: this ring sensor may or may not be necessary, it depends on distance from the phone and noise level in the environment.
Cart
;if (window.focus) {newwindow.focus()}; "ShoreTel Ring Sensor RD-1-POD for CS & Savi Series Wireless Headsets 78887-01")
